DQ Technology VisionNet W203-4" to "=VisionNet "</comment> Wireless embedded system default password and login
The default login for the DQ Technology VisionNet W203-4" to "=VisionNet "</comment> Wireless embedded system is username sti.admin5 and password admin at http://192.168.5.1.
Also searched as: dq technology visionnet w2034" to "=visionnet "</comment> wireless embedded system · dq technology visionnet w203 4" to "=visionnet "</comment> wireless embedded system · dqtechnologyvisionnetw2034"to"=visionnet"</comment>wirelessembeddedsystem
Default login
How to login
- Connect to the VisionNet W203-4" to "=VisionNet "</comment> Wireless embedded system Wi-Fi network or plug in a cable.
- Type http://192.168.5.1 into the address bar, not the search box.
- Enter the username and password. The label under your router shows the exact ones for your unit.
- Change the admin password and the Wi-Fi password once you are in.
Questions about the DQ Technology VisionNet W203-4" to "=VisionNet "</comment> Wireless embedded system
What is the default password for the DQ Technology VisionNet W203-4" to "=VisionNet "</comment> Wireless embedded system?
The DQ Technology VisionNet W203-4" to "=VisionNet "</comment> Wireless embedded system ships with username sti.admin5 / password admin. 3 of the 6 DQ Technology models in our database with a known default use the same login. If your unit has a label with a different password, the label wins.
What is the DQ Technology VisionNet W203-4" to "=VisionNet "</comment> Wireless embedded system IP address?
The DQ Technology VisionNet W203-4" to "=VisionNet "</comment> Wireless embedded system uses 192.168.5.1 as its default login address.
What if the DQ Technology VisionNet W203-4" to "=VisionNet "</comment> Wireless embedded system login does not work?
Check the label on the router for a unit-specific password. If the password was changed and nobody knows it, a factory reset restores the default.
How do I reset the DQ Technology VisionNet W203-4" to "=VisionNet "</comment> Wireless embedded system?
With the router powered on, press and hold the recessed Reset button for 10-15 seconds. It restarts with the default login, and all your settings are erased.
Default logins across DQ Technology models
Share of the 6 DQ Technology models in our database whose default login is known.
| Username | Password | Models | Share |
|---|---|---|---|
| sti.admin5 | admin | 3 | 50% |
| adslroot | admin | 1 | 17% |
| admin | sti.admin5 | 1 | 17% |
| adslroot | blank | 1 | 17% |
DQ Technology IP addresses
Share of the 6 DQ Technology models in our database whose login address is known.
- 192.168.5.1 67% (4) Open
- 192.168.1.1 33% (2) Open
Ping your router
If the login page will not load, check whether your computer can reach 192.168.5.1 at all:
Other DQ Technology models
| Model | Username | Password | IP address |
|---|---|---|---|
| VisionNet M505 | - | - | - |
| VisionNet M505N | - | - | - |
| VisionNet M605N | - | - | - |
| VisionNet M625N | adslroot | admin | 192.168.1.1 |
| VisionNet TW207er-4 | - | - | - |
| VisionNet W203-4 | - | - | - |
| VisionNet W203-4 (01-SSC-5515) | sti.admin5 | admin | 192.168.5.1 |
| VisionNet W203ER-4 | admin | sti.admin5 | 192.168.5.1 |
| VisionNetM625N R1 | adslroot | blank | 192.168.1.1 |
| VisionNetTW207ER-4 | - | - | - |
| VisionNetW203-4 | sti.admin5 | admin | 192.168.5.1 |
Network Toolbox
Port Checker
Check if port 80 or 443 is open on your external IP address for remote access.
Open Port Checker